We are counted among the reputed business entities, engaged in manufacturing and supplying Rhino 110C Pick And Carry Cranes. These cranes have high ground clearance for easier rough terrain operation. These cranes are mainly used in construction sites for lifting and moving heavy materials. Well laid out and ergonomically placed controls & instrument cluster ensure ease of operation. Rhino 110C Pick And Carry Cranes are available for clients in different technical and power specifications as per their requirements. We offer these cranes at affordable prices.
Known for its 11 tones of lifting capacity, the Rhino 110C model of Pick & Carry Cranes boasts of having four cylinder diesel engine of Simpson brand, advanced transmission section with selectable speed parameters and dry friction type single clutch. This material handling system can attain up to 29 kmph load (without lifting load). Pneumatic brake, hydraulic steering with 55 degree navigation facility, gear pump controlled hydraulic section and 1800 mm stretchable telescopic boom are its main attributes. Hydraulic motor driven hoist of this crane can achieve 50 meters of lifting speed and it has hose re-routing arrangement. The electrical section of this lifting device consists of battery of 75 Amp/h specifications.
Featured with well built structure, the Rhino 110C is equipped with precisely developed operator’s cabin with roll over protection structure. The cabin is furnished with curved windscreen with large viewing angle. Its control panel has instrument cluster for better user experience. The 400 mm ground clearance level enables this crane to travel on irregular land surface with ease. The full length chassis of this lifting device provides it required structural support. Its 5.5 meters of radius covering capacity within limited space and 9 meters of elevation height deserve special mention. This crane is protected against hoist malfunction and it is equipped with cylinder guard, audio based material overload and over lifting indicating arrangement.
|
Lifting capacity (free on wheels ) |
11 tons
|
|
Engine |
Simpson`s S433(I) F1 (CEV BS-lll),4cylinder, water cooled diesel engine or suitable equivalent engine
|
|
Rated Power |
48 BHP (36 KW ) at 2200 RPM. |
|
Transmission |
Sliding mesh with 6 forward and 2 reverse speeds and high-low range selector. |
|
Clutch |
single dry friction clutch plate. |
|
Top speed |
29 KMPH without load. |
|
Steering |
Hydraulically operated with 55°articulation on either side and turning radius of 5.5 mtrs (approx ) on outer rear wheels. |
|
Brakes |
Pneumatically assisted hydraulic brakes.Front and rear breaks are actuated through a single pedal. Parking break is provided. |
|
Hydraulic system |
|
|
Telescopic boom | 4 part boom, 3 part hydraulically actuated and synchronized and 4th part power extended having self adjusting hook block.
|
|
Telescopic Time |
10 Seconds. |
|
Boom luffting Range Time |
-1° to + 60° 20 seconds. |
|
Hoist |
Winch is driven by hydraulic motor Employing 4 falls of 13 mm dia rope. |
| Hoist speed |
50 Meters./Min.(Line speed) |
|
|
|
|
Tyres Front Rear |
11x20-16 PR(4 Nos.) 13x24-12 PR(2 Nos. |
|
Fluid Capacities Air cleaner Engine Fuel tank Hydraulic tank Transmission |
0.75 ltrs 8 ltrs 45 ltrs 100 ltrs 34.ltrs |
|
Safety |
|
|
|
|
|
|
|
|
Variant models |
Rhino 110 (2300mm Extension stroke). Rhino 110 T ( without winch ) . |
|
Operating weight | 8150 kgs |
|
 |
ACTION CONSTRUCTION EQUIPMENT LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |
08037301385
English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese
Send Inquiry
Send SMS
Call Me Free
